Sincro Systems Produse Transmittere Transmittere concentratii gaze Transmitter CO2 cu senzor intern, cu iesire RS485 si relee

Sondaj

Cum ati aflat de Sincro Systems?
 
Transmitter CO2 cu senzor intern si interfata EthernetTransmitter CO2 cu senzor intern, iesire Ethernet si relee

Transmitter CO2 cu senzor intern, cu iesire RS485 si relee

Transmitter CO2 cu senzor intern, cu iesire RS485 si relee
Imagine mare


H5424 CO2 concentration transmitter with RS485 and two relay outputs

The CO2 - carbon dioxide level is recently regarded as an important parameter that substantially determines the quality of the interior climate. Especially in buildings where many people gather, such meeting rooms, hospitals, schools, cinemas, theatres and care centres. With the help of CO2 sensor engineers, technical advisors, environmental experts and health specialists can optimize the ventilation for creation of a healthy interior climate.

The CO2 measurement is based on a 2-source, 2-beam process. CO2 measurement with long-term stability is guaranteed thanks to the proven non-dispersive infrared (NDIR) CO2 measurement cell.

The unique patented auto-calibration procedure compensates for aging of the infrared source and guarantees high reliability, long term stability and eliminates the need of periodical recalibration in the field.

APPLICATIONS - measuring of CO2 level at:

  • building HVAC management
  • climate technology
  • schools, universities
  • meeting rooms, hospitals, cinemas, theatres
  • weather stations

Transmitter is equipped with two relay outputs for alarm indication or control of external devices. Each relay can be assigned to any measured or computed value. For each relay setting of delay, hysteresis, audible alarm is enabled.
Parameters are easy adjustable from regulator keyboard or from the computer.

Transmitter contains a microprocessor based control circuitry in a durable plastic case with connection terminals.

The CO2 concentration sensor is built inside the case.

Large dual line LCD is an advantage. Display is possible to switch off. Computerized design ensures maximum long term stability and failure indication.

MeasuredCO2 concentration values are converted to RS485 serial output. Transmitter circuitry is galvanically isolated from power circuitry to prevent collision in RS485 network.

Serial output RS485 - transmitter works with ModBus RTU communication protocol or with Advantech ADAM compatible protocol. Protocol is user selectable in special configuration mode by means of the PC. Serial link enables to read actual readings and modify transmitter configuration. Instrument works always in slave mode, i.e. responds only to master device query. Transmitters have the address space available from 1 to 255. Communication speed is 110 to 115200Bd.

For acquiring values from several transmitters connected to RS485 bus, third party software is necessary to use.

Tested functionality is with programs:

LabVIEW from National Instruments, TIRS.NET, ControlWeb, EasyView.

Technical data:

Technical parametersValue
Output RS485
Measured Value CO2
Construction Type Ambient Air
Design Industrial
Temperature Measuring Range None
Relay Output Yes
Two-State Input No
Lcd Display Yes
Maximum switching voltage, current, power of relay output 50V, 2A, 60VA
Audible alarm from built-in beeper - switchable
Range of CO2 concentration measurement 0 to 2000ppm
Accuracy of CO2 concentration measurement (50ppm +2% from reading) at 25C and 1013hPa
Optional range of CO2 concentration measurement 0 to 10000ppm (100ppm +5% from reading) at 25C and 1013hPa
Temperature operating range -30 to +60C
Measuring interval of CO2 15s
Communication protocol ModBus RTU and Advantech ADAM compatible protocol
Communication speed 110 to 115200 Bd
IP protection IP30
Power 9-30Vdc, power consumption approximately 1W
Dimensions 136 x 150 x 45 mm (W x H x D)
Weight approximately 360g
Warranty 2 years

Accesorii optionale:

A1510 - AC/DC adapter 12V/450mA stabilised a1510adapter
SP006 - Tool for easy connection to WAGO terminals 233 for serial output transmitters sp006tool

pdf2 Descarcati brosura
pdf2 Descarcati manualul de utilizare
Icon soft Descarcati software de configurare


Recomandati produsul / pagina:
 
Sincro Systems SRL
Str. Matei Basarab, nr. 85, bl. L119bis, ap. 2, sector 3, București, România
Telefon: 021-320.66.02, 0723.369.867; Fax: 021-327.30.07
Email: office@sincro.ro