HWg-WLD - detector de scurgeri de apa si inundatieIndicator SW-BCD-94, PLC, binar, byte sau RS-485 Modbus RTU
Indicator de greutate SWI-94
 Imagine mare
|
Weight indicator SWI-94 was designed to provide weighing and control functions for industrial process systems. Device is equipped with pushbuttons which allow easy setting of tare and zero, and also switching between netto and brutto indications. Measured weight is displayed on 6 digit readable LED display with settable bright. Two relay outputs allow to use the SWI-94 as controller for simple systems with batching function. Built-in analog output and RS-485 interface enable remote controlling of the device by a host system if required. The firmware makes possible to calibrate the device in two ways: using theoretical characteristic of the sensor or using real load put on the sensor.
Specificatii tehnice:
Power supply | 19V ÷ 50V DC; 16V ÷ 35V AC or 85 ÷ 260V AC/DC |
Input | tensometer, programmable sensitivity selectable up to 2 mV/V or 4 mV/V load cells power supply: 4,6 V ± 10%, Imax ~ 60 mA, load cells connections: 4-wire technique, max. 4 load cells 350 Ohm |
Power consumption | for 85 ÷ 260V AC/DC and 16V ÷ 35V AC power supply: max. 4,5 VA; 19V ÷ 50V DC power supply: max. 4,5 W |
Resolution | 10 000 d |
Display | LED, 6 x 13 mm, red (green - on request) brightness adjustable in 8 steps |
Output | 2 relays 1A/250V AC (cos fi =1); transducer power supply: 24 V DC + 5% -10% / max 100 mA, active current: operating range max. 0 - 24 mA, load resistance max 700 Ohm |
Communication interface | RS-485, 8N1 and 8N2, 1200 ÷ 115200 bit/s, Modbus RTU |
Operating temperature | 0°C ÷ +50°C |
Storage temperature | -10°C ÷ +70°C |
Protection class | IP 65 |
Case material | NORYL-GFN2S E1 |
Case dimensions | 96 x 48 x 100 mm |
Mounting | panel |
Panel cut-out dimensions | 90,5 x 43 mm |
Installation depth | min. 102 mm |
|
|
|
|
|
Recomandati produsul / pagina:
|
|
Recomandari
Validare / Calificare / Harta temperaturi-umiditati

Termometru Ethernet cu POE

P8610 - Ethernet Thermometer with PoE
Termometru Ethernet SNMP HWg-STE

HWg-STE este un termometru Ethernet si web cu software pentru crearea de rapoarte in Excel. Alarmarile pentru depasirea pragurilor setate se fac prin e-mail si SNMP.
Inregistrator de temperatura si umiditate cu imprimanta VLT

Inregistratorul cu imprimanta VLT permite masurarea si inregistrarea temperaturii in vehiculele de transport cu posibilitatea imediata de a tipari valorile inregistrate.
mai mult...
DataNet

Sistem de monitorizare temperatura si umiditate (si alte marimi) wireless, protocol ZigBee.
mai mult...
Sistem TRS
 
Sistem de monitorizare temperatura si umiditate cu fir.
mai mult...
Inregistrator (data logger) de temperatura USB MicroLite

Estetic si mic, este un data logger cu grad de protectie IP68,
usor de utilizat.
mai mult...
LogTag
 
Data loggere (inregistratoare) de temperatura si umiditate de marimea unei carti de credit.
mai mult...
MicroLog / MicroLog PRO
 
Inregistratoare (data loggere compacte) de temperatura si umiditate plus un senzor extern (temperatura, tensiune, curent, lumina, pH, contact, etc.).
mai mult...
Inregistrator de temperatura cu imprimanta T-Print

Inregistratorul de temperatura cu imprimanta permite inregistrarea temperaturii in vehiculele de transport frigorific, cu posibilitatea imediata de a tipari valorile inregistrate.
mai mult...
|